[求助] TTL 刷 TPLINK v841n v1 进不了CFE

[复制链接]

家诚哥

15 回帖	26 积分	11 小时在线时间

新兵上阵

注册时间: 2011-2-12

金币: 8 个

威望: 0 个

荣誉: 0 个

发消息

尚未签到

发表于 2011-12-20 11:35 |显示全部楼层

接上机子在crt 上显示。。。。。。

db_qm: start ...
Now flash_init!
db_qm: init_entry = 8001bf78
db_qm: init_entry = 8001bf80
db_qm: init_entry = 8001bf88
use_bootp = 0
index = 0
use_bootp = 0
Ethernet eth0: MAC address 00:0d:0b:13:6b:00
IP: 0.0.0.0, Default server: 0.0.0.0
db_qm: init_entry = 8001bf90
db_qm: end.

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 23:30:02, Sep 20 2007

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: pb42
RAM: 0x80000000-0x82000000, [0x80027130-0x80fe4000] available
FLASH: 0xbf000000 - 0xbf400000, 64 blocks of 0x00010000 bytes each.
== Executing boot script in 0.500 seconds - enter ^C to abort.This is the new redboot,good!
在一开动我就是一直按 crtl+c 为什么一直不能进入reboot的呢？而机子一直出现下面内容。。。。

Image loaded from 0x80060000-0x8028b086
Now booting linux kernel:
Base address 0x80050000 Entry 0x80267000
Cmdline : console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init
Linux version 2.6.15--LSDK-6.1.1.40 (root@hexiang) (gcc version 3.4.4) #47 Sun Sep 30 20:11:57 CST 2007
flash_size passed from bootloader = 4
arg 1: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 100.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29724k/32768k available (1711k kernel code, 3028k reserved, 360k data, 148k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
c.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
cmdlinepart partition parsing not available
Searching for RedBoot partition table
4 RedBoot partitions found on MTD device ar7100-nor0
Creating 4 MTD partitions on "ar7100-nor0":
0x00000000-0x00040000 : "RedBoot"
mtd: Giving out device 0 to RedBoot
0x00040000-0x00140000 : "vmlinux.bin.gz"
mtd: Giving out device 1 to vmlinux.bin.gz
0x00140000-0x003e0000 : "pb42-jffs2"
mtd: Giving out device 2 to pb42-jffs2
0x003e0000-0x00400000 : "external-1"
mtd: Giving out device 3 to external-1
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing unused kernel memory: 148k freed
init started:  BusyBox v1.01 (2007.08.02-13:15+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
ip_conntrack version 2.4 (256 buckets, 5120 max) - 236 bytes per conntrack
Now flash open!

(none) mips #47 Sun Sep 30 20:11:57 CST 2007 (none)
(none) login: device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
ath_dfs: module license 'Proprietary' taints kernel.
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_hal: 0.9.14.25 (AR5416, DEBUG, REGOPS_FUNC)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Chan  Freq  RegPwr  HT CTL CTL_U CTL_L DFS
1  2412n    20  HT20  1 0 1    N
1  2412n    20  HT40  1 0 1    N
2  2417n    20  HT40  1 0 1    N
3  2422n    20  HT40  1 1 1    N
4  2427n    20  HT40  1 1 1    N
5  2432n    20  HT40  1 1 1    N
6  2437n    20  HT40  1 1 1    N
7  2442n    20  HT40  1 1 1    N
8  2447n    20  HT40  1 1 1    N
9  2452n    20  HT40  1 1 1    N
  10  2457n    20  HT40  1 1 1    N
  11  2462n    20  HT40  1 1 1    N
  12  2467n    20  HT40  1 1 0    N
  13  2472n    20  HT40  1 1 0    N
wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11ng MCS:  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
wifi0: mac 13.2 phy 8.1 radio 15.0
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5416 PCI: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan: mac acl policy registered
ar5416SetPowerPerRateTable() syn 2412 ctl 2412 ext 2412 is40 0
  6mb OFDM  17.0 dBm |  9mb OFDM  17.0 dBm | 12mb OFDM  17.0 dBm | 18mb OFDM  17.0 dBm
24mb OFDM  17.0 dBm | 36mb OFDM  17.0 dBm | 48mb OFDM  16.0 dBm | 54mb OFDM  14.0 dBm
1L CCK 17.0 dBm | 2L CCK 17.0 dBm | 2S CCK 17.0 dBm | 5.5L CCK 17.0 dBm
5.5S CCK 17.0 dBm | 11L  CCK 17.0 dBm | 11S  CCK 17.0 dBm | XR       17.0 dBm
HT20mcs 0  17.5 dBm | HT20mcs 1  17.5 dBm | HT20mcs 2  17.5 dBm | HT20mcs 3  17.5 dBm
HT20mcs 4  17.5 dBm | HT20mcs 5  17.0 dBm | HT20mcs 6  13.0 dBm | HT20mcs 7  11.0 dBm
HT40mcs 0 0.0 dBm | HT40mcs 1 0.0 dBm | HT40mcs 2 0.0 dBm | HT40mcs 3 0.0 dBm
HT40mcs 4 0.0 dBm | HT40mcs 5 0.0 dBm | HT40mcs 6 0.0 dBm | HT40mcs 7 0.0 dBm
Dup CCK    0.0 dBm | Dup OFDM 0.0 dBm | Ext CCK    0.0 dBm | Ext OFDM 0.0 dBm
2xAntennaReduction: 0, 2xMaxRegulatory: 40, 2xPowerLimit: 60
2xMaxPowerLevel: 35 (HT20)
TPC Enabled 1 1 0
ar5416SetPowerPerRateTable() syn 2412 ctl 2412 ext 2412 is40 0
  6mb OFDM  17.0 dBm |  9mb OFDM  17.0 dBm | 12mb OFDM  17.0 dBm | 18mb OFDM  17.0 dBm
24mb OFDM  17.0 dBm | 36mb OFDM  17.0 dBm | 48mb OFDM  16.0 dBm | 54mb OFDM  14.0 dBm
1L CCK 17.0 dBm | 2L CCK 17.0 dBm | 2S CCK 17.0 dBm | 5.5L CCK 17.0 dBm
5.5S CCK 17.0 dBm | 11L  CCK 17.0 dBm | 11S  CCK 17.0 dBm | XR       17.0 dBm
HT20mcs 0  17.5 dBm | HT20mcs 1  17.5 dBm | HT20mcs 2  17.5 dBm | HT20mcs 3  17.5 dBm
HT20mcs 4  17.5 dBm | HT20mcs 5  17.0 dBm | HT20mcs 6  13.0 dBm | HT20mcs 7  11.0 dBm
HT40mcs 0 0.0 dBm | HT40mcs 1 0.0 dBm | HT40mcs 2 0.0 dBm | HT40mcs 3 0.0 dBm
HT40mcs 4 0.0 dBm | HT40mcs 5 0.0 dBm | HT40mcs 6 0.0 dBm | HT40mcs 7 0.0 dBm
Dup CCK    0.0 dBm | Dup OFDM 0.0 dBm | Ext CCK    0.0 dBm | Ext OFDM 0.0 dBm
2xAntennaReduction: 0, 2xMaxRegulatory: 40, 2xPowerLimit: 60
2xMaxPowerLevel: 34 (LEG)
ath_newstate: Resetting VAP dfswait_run
ath_newstate: Resetting VAP dfswait_run
ar5416SetPowerPerRateTable() syn 2427 ctl 2437 ext 2417 is40 1
  6mb OFDM  17.0 dBm |  9mb OFDM  17.0 dBm | 12mb OFDM  17.0 dBm | 18mb OFDM  17.0 dBm
24mb OFDM  17.0 dBm | 36mb OFDM  17.0 dBm | 48mb OFDM  16.0 dBm | 54mb OFDM  14.0 dBm
1L CCK 17.0 dBm | 2L CCK 17.0 dBm | 2S CCK 17.0 dBm | 5.5L CCK 17.0 dBm
5.5S CCK 17.0 dBm | 11L  CCK 17.0 dBm | 11S  CCK 17.0 dBm | XR       17.0 dBm
HT20mcs 0  17.0 dBm | HT20mcs 1  17.0 dBm | HT20mcs 2  17.0 dBm | HT20mcs 3  17.0 dBm
HT20mcs 4  17.0 dBm | HT20mcs 5  17.0 dBm | HT20mcs 6  13.0 dBm | HT20mcs 7  11.0 dBm
HT40mcs 0  17.5 dBm | HT40mcs 1  17.5 dBm | HT40mcs 2  17.5 dBm | HT40mcs 3  17.5 dBm
HT40mcs 4  17.5 dBm | HT40mcs 5  17.0 dBm | HT40mcs 6  13.0 dBm | HT40mcs 7  11.0 dBm
Dup CCK 17.5 dBm | Dup OFDM 17.5 dBm | Ext CCK 17.0 dBm | Ext OFDM 17.0 dBm
2xAntennaReduction: 0, 2xMaxRegulatory: 40, 2xPowerLimit: 60
2xMaxPowerLevel: 35 (HT40)
TPC Enabled 1 1 0
ath_chan_set: Changing to channel 2437, Flags 30080, PF 0
device eth0 left promiscuous mode
br0: port 1(eth0) entering disabled state
device ath0 entered promiscuous mode
br0: port 1(ath0) entering learning state
br0: topology change detected, propagating
br0: port 1(ath0) entering forwarding state
device eth0 entered promiscuous mode
br0: port 2(eth0) entering learing state
br0: topology change detected, propagating
br0: port 2(eth0) entering forwarding state

问题就是我一直接上 tx rx 地线  通电后  一直按 ctrl+c 为什么不能进入CFE界面进行刷机的
我是能过一个 51单片机接出 tx rx 地线来接进 tplink841v1
救助啊。。

另，是不是硬件有问题，问题是我能读取tplink841v1 信息就是上传不了刷机包

address, release, server, start, version