请教大师

mouth4949

lijiqing  版主您好：
          我给您附个模型，您帮我看看问题究竟出在哪    不胜感激

lijiqing

回复 13# mouth4949


    你的模型我看了。开始运算就报错，提示第101条线重复。我看了，你的第101条线是加馈源的线，把它改成1001号，把馈源处也改过来。这个问题就算解决了。不过你的模型里还有很多重复编号的，你的螺旋和反射盘都是从1号开始，其实有101条线都是重复标号。最好你在建模反射板的时候，从150号开始。否则，你把两个文件合并到一起，编号就会重复。
接着弹出对话框，提示错误：
Warn.: volumes for Wires 1 (tag 2) and 16 (tag 17) are intersecting.
Warn.: volumes for Wires 1 (tag 2) and 17 (tag 19) are intersecting.
Warn.: volumes for Wires 1 (tag 2) and 30 (tag 35) are intersecting.
Warn.: volumes for Wires 1 (tag 2) and 40 (tag 51) are intersecting.
Error: Wires 2 (tag 3) and 18 (tag 21) are overlaid.
Error: Wires 4 (tag 5) and 19 (tag 23) are overlaid.
Error: Wires 5 (tag 6) and 20 (tag 24) are overlaid.
Error: Wires 7 (tag 8) and 21 (tag 26) are overlaid.
Error: Wires 7 (tag 8) and 31 (tag 42) are overlaid.
Error: Wires 8 (tag 9) and 22 (tag 27) are overlaid.
Error: Wires 8 (tag 9) and 32 (tag 43) are overlaid.
Error: Wires 9 (tag 10) and 23 (tag 28) are overlaid.
Error: Wires 9 (tag 10) and 33 (tag 44) are overlaid.
Error: Wires 10 (tag 11) and 24 (tag 29) are overlaid.
Error: Wires 10 (tag 11) and 34 (tag 45) are overlaid.
Error: Wires 11 (tag 12) and 25 (tag 30) are overlaid.
Error: Wires 11 (tag 12) and 35 (tag 46) are overlaid.
Error: Wires 12 (tag 13) and 26 (tag 31) are overlaid.
Error: Wires 12 (tag 13) and 36 (tag 47) are overlaid.
Error: Wires 13 (tag 14) and 27 (tag 32) are overlaid.
Error: Wires 13 (tag 14) and 37 (tag 48) are overlaid.
Error: Wires 14 (tag 15) and 28 (tag 33) are overlaid.
Error: Wires 14 (tag 15) and 38 (tag 49) are overlaid.
Error: Wires 15 (tag 16) and 29 (tag 34) are overlaid.
Error: Wires 15 (tag 16) and 39 (tag 50) are overlaid.
Error: Wires 16 (tag 17) and 30 (tag 35) are overlaid.
Error: Wires 16 (tag 17) and 40 (tag 51) are overlaid.
Warn.: volumes for Wires 16 (tag 17) and 87 (tag 98) are intersecting.
Warn.: volumes for Wires 17 (tag 19) and 56 (tag 67) are intersecting.
Warn.: volumes for Wires 17 (tag 19) and 71 (tag 82) are intersecting.
Warn.: volumes for Wires 17 (tag 19) and 85 (tag 96) are intersecting.
Error: Wires 21 (tag 26) and 31 (tag 42) are overlaid.
Error: Wires 22 (tag 27) and 32 (tag 43) are overlaid.
Error: Wires 23 (tag 28) and 33 (tag 44) are overlaid.
Error: Wires 24 (tag 29) and 34 (tag 45) are overlaid.
Error: Wires 25 (tag 30) and 35 (tag 46) are overlaid.
Error: Wires 26 (tag 31) and 36 (tag 47) are overlaid.
Error: Wires 27 (tag 32) and 37 (tag 48) are overlaid.
Error: Wires 28 (tag 33) and 38 (tag 49) are overlaid.
Error: Wires 29 (tag 34) and 39 (tag 50) are overlaid.
…………………………………………………………

下面还有很多，其中error必须纠正，warn可以暂时不管它。
这些提示都是说你的线段发生交叉或覆盖。
我看了一下，你的振子只用38条线就可以建成，为什么你有101条线段？你是怎么建模的，出现这么多重复的线段。能告诉我吗？
我看看你的建模数据，再进一步分析。

mouth4949

上边的圆环是复制的，是不是这个TAG也重复

mouth4949

上边的圆环是复制的

mouth4949

坚持在线等

lijiqing

回复 15# mouth4949


    你用什么方式复制的？从建模文件里怎么看不到复制？

mouth4949

在GEOMETRY EDIT建模里先选中下边的圆环，然后在其工具栏选EDIT--copy wire(s),再paste wire(s)

lijiqing

你是用GEOMETRY EDIT建模的？这样建模是不能优化的。
我没有用过geometry edit ，所以就没法给你什么意见。
不过，我看了一下，你好像无意中复制了不只一次，所以，你的模型层层叠叠，有好几层环。所以软件提示你有很多线段重叠、交叉。你好好检查一下你的模型。

mouth4949

谢谢版主