中尉
- 注册时间
- 2013-10-17
- 金币
- 700 个
- 威望
- 1 个
- 荣誉
- 0 个
累计签到:61 天 连续签到:0 天 [LV.100]试剑无线
|
hlbdsy 发表于 2013-11-29 11:49 
玩pJ要有耐心,学习了。各参数含义能解释一下否?
reaver必需的参数:
-i, --interface=wlan Name of the monitor-mode interface to use //监视模式接口使用的名称
-b, --bssid=mac BSSID of the target AP //目标AP的SSID
reaver可选参数:
-m, --mac=mac MAC of the host system //主机系统的MAC
-e, --essid=ssid ESSID of the target AP //目标AP的ESSID
-c, --channel=channel Set the 802.11 channel for the interface (implies -f)
//设置接口的802.11信道 (意味着 -f)
-o, --out-file=file Send output to a log file [stdout] //输出发送到一个日志文件
-s, --session=file Restore a previous session file //恢复以前的记录文件
-C, --exec=command Execute the supplied command upon successful pin recovery
//所提供的命令执行成功后,pin 恢复
-D, --daemonize Daemonize reaver //守护进程 reaver
-a, --auto Auto detect the best advanced options for the target AP
//自动检测目标AP的最先进的选项
-f, --fixed Disable channel hopping //禁用信道跳频
-5, --5ghz Use 5GHz 802.11 channels //使用5GHz的802.11信道
-v, --verbose Display non-critical warnings (-vv for more) //显示非关键的警告(- VV更多)
-q, --quiet Only display critical messages //仅显示重要消息
-h, --help Show help //显示帮助
reaver高级选项:
-p, --pin=wps pin Use the specified 4 or 8 digit WPS pin //使用指定的4个或8个的 pin WPS
-d, --delay=seconds Set the delay between pin attempts [1] //设置pin尝试之间的延迟[1]
-l, --lock-delay=seconds Set the time to wait if the AP locks WPS pin attempts [60]
//设置等待的时间,如果AP锁定WPS PIN尝试[60]
-g, --max-attempts=num Quit after num pin attempts //退出后NUM pin尝试
-x, --fail-wait=seconds Set the time to sleep after 10 unexpected failures [0]
//设定时间后进入休眠10[0]意外故障
-r, --recurring-delay=xy Sleep for y seconds every x pin attempts //对每一个pin码尝试Y秒
-t, --timeout=seconds Set the receive timeout period [5] //设置接收超时时间[5]
-T, --m57-timeout=seconds Set the M5M7 timeout period [0.20] //设置M5M7超时期[0.20]
-A, --no-associate Do not associate with the AP (association must be done by another application)
//不要与AP关联(协会必须由另一个应用程序进行)
-N, --no-nacks Do not send NACK messages when out of order packets are received
//不要发送NACK消息收到时,为了包出
-S, --dh-small Use small DH keys to improve crack speed //使用小DH密钥,以提高PJ速度
-L, --ignore-locks Ignore locked state reported by the target AP //忽略锁定状态的目标AP
-E, --eap-terminate Terminate each WPS session with an EAP FAIL packet
//终止每一个EAP失败包WPS的记录
-n, --nack Target AP always sends a NACK [Auto] //目标AP发送一个NACK[自动]
-w, --win7 Mimic a Windows 7 registrar [False] //模仿Windows 7的注册处处长[虚假]
那是我上网抄的希望对您有帮 |
|