今天得到一硬件，求固件！（IP1001+ar7161+AR9220+AR9223）

eeff11

楼主这个多少钱啊？是淘宝买来的吗？

zhang85628

唉，我有个一模一样的，
http://www.anywlan.com/thread-286940-1-1.html
现在手里没有48v电源也没有编程器，想起要焊那个玩意就头痛。。。。。。

gmagm

固件可用啊···

第一网络科技

我也有个。哈

xieytao

woee 发表于 2013-5-9 20:56
一定要焊下芯片  编程器写进去

编程器刷入后，能启动，也能从上级路由获得ip地址，但是用获得的ip地址进不去web页面。

t20ily

我有个京信AP2400，也是一样的硬件，目前使用正常，不过网速只能54M，想刷这个编程器固件，不知道网速能否达到300M？

riyueyou

想知道这块板子上usb接口的电感是啥参数可不可以短接？wo
顺便附上ttl信息
会 折腾的自己提取固件刷相应分区试试反正也刷不死！！前提是bootloader没遭到破坏

+Ethernet eth0: MAC address 00:03:7f:ff:ff:fe
IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 14:21:45, Mar 27 2010

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: pb44
RAM: 0x80000000-0x84000000, [0x800511f0-0x80fe1000] available
FLASH: 0xbf000000 - 0xc0000000, 256 blocks of 0x00010000 bytes each.
== start led2 on
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load -d vmlinux.bin.gz
Image loaded from 0x80060000-0x80267085
config Image loaded from 0xbffe0000-0xbfff0000
RedBoot> exec -c "console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M"
Now booting linux kernel:
Base address 0x80050000 Entry 0x80245000
Cmdline : console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
Linux version 2.6.15--LSDK-7.3.0.387 (blackdragon@aqlinux) (gcc version 3.4.4) #202 Mon Apr 9 19:39:07 HKT 2012
flash_size passed from bootloader = 16
arg 1: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 512 (order: 9, 8192 bytes)
Using 340.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 62280k/65536k available (1591k kernel code, 3192k reserved, 344k data, 140k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
Generic PHY: Registered new driver
AR7100 GPIOC major 0
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
Searching for RedBoot partition table in ar7100-nor0 at offset 0xff0000
7 RedBoot partitions found on MTD device ar7100-nor0
Creating 7 MTD partitions on "ar7100-nor0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00160000 : "vmlinux.bin.gz"
0x00160000-0x00f60000 : "pb44-jffs2"
0x00f60000-0x00fe0000 : "config"
0x00fe0000-0x00ff0000 : "board-config"
0x00ff0000-0x00fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x00fff000-0x01000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
Creating 1 MTD partitions on "ar7100-nor0":
0x00ff0000-0x01000000 : "fisconfig"
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
init started:  BusyBox v1.4.2 (2012-04-09 19:43:45 HKT) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Mounting file systems
ln: /etc/resolv.conf: File exists
Device version is the newest.
AP

in ap83 pro_ctl_mod init
AP2400-IFM,0500G00P01
0500G0
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 512
AG7100: Max segments per packet 4
AG7100: Max tx descriptor count    400
AG7100: Max rx descriptor count    252
AG7100: fifo cfg 3 018001ff
AG7100CHH: Mac address for unit 0
AG7100CHH: ff:ff:ff:ff:ff:ff
ath_hal: 0.9.17.1 (AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2316, RF2317, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
dfs_init_radar_filters: Unknown dfs domain 0
!!!!! SC Callback Registration for wifi0
wifi0: Atheros 9160: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan: mac acl policy registered
wlan_sms4: Version 1.0.1
Copyright (c) 2001-2007 IWNCOMM Communications, Inc, All Rights Reserved
ag7100_ring_alloc Allocated 4800 at 0x83b5e000
ag7100_ring_alloc Allocated 3024 at 0x8025a000
AG7100: cfg1 0xf cfg2 0x7014
AG7100: unit 0: phy not up carrier 1
Writing 4
AG7100: unit 0 phy is up...RGMii 100Mbps full duplex
AG7100: pll reg 0x18050010: 0x1099  AG7100: cfg_1: 0x1ff0000
AG7100: cfg_2: 0x3ff
AG7100: cfg_3: 0x18001ff
AG7100: cfg_4: 0xffff
AG7100: cfg_5: 0x7ffef
AG7100: done cfg2 0x7115 ifctl 0x10000 miictrl 0x12
use serverIP
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
device eth0 entered promiscuous mode
default: port 1(eth0) entering learning state
default: topology change detected, propagating
default: port 1(eth0) entering forwarding state
hostapd config dir ok
killall: udhcpc: no process killed
dev.wifi0.thinap = 0
Jan  1 08:01:16 crond[1016]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:16 crond[1021]: crond 2.3.2 dillon, started, log level 8

/jffs/config.ap83: /jffs/config.ap83: 1: cannot create /proc/sys/dev/wifi0/nonoverlapping: Directory nonexistent
into alarmfunc
/jffs/config.ap83: /jffs/config.ap83: 1: /usr/sbin/hostapd: not found
SC Pushbutton Notify on wifi0::ath0
Country ie is CN
Country ie is CN
device ath0 entered promiscuous mode
default: port 2(ath0) entering learning state
============================
setantenna : wifi0 2
============================
default: topology change detected, propagating
default: port 2(ath0) entering forwarding state
Jan  1 08:01:36 crond[2821]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:36 crond[2830]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:36 crond[2839]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:36 crond[2848]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:37 crond[2866]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:37 crond[2875]: crond 2.3.2 dillon, started, log level 8

Jan  1 08:01:37 crond[2879]: crond 2.3.2 dillon, started, log level 8

此主板自带的网卡是大功率的自带功放！最高32DB

ztz188

woee 发表于 2013-5-9 20:56
一定要焊下芯片  编程器写进去

问一下是3个文件都下载解压后刷，还是只下载解压其中一个刷。

woee

riyueyou 发表于 2014-9-9 11:48
想知道这块板子上usb接口的电感是啥参数可不可以短接？wo
顺便附上ttl信息
会 折腾的自己提取固件刷相应 ...

改了也没用，木有支持usb的固件

woee

ztz188 发表于 2014-9-12 12:58
问一下是3个文件都下载解压后刷，还是只下载解压其中一个刷。

三个文件下载啦，解压会生成一个文件，，用编程器刷进去。就好了

ztz188

woee 发表于 2014-9-15 08:19
三个文件下载啦，解压会生成一个文件，，用编程器刷进去。就好了

奸的，谢谢！

riyueyou

woee 发表于 2014-9-15 08:19
三个文件下载啦，解压会生成一个文件，，用编程器刷进去。就好了

赶快把头像换了！！！吓我一跳