ubnt解决方案
查看: 2120|回复: 0

请大内高手翻译网件WG111V2用BT的注意事项

[复制链接]

50

回帖

538

积分

25 小时

在线时间

中尉

注册时间
2008-7-4
金币
467 个
威望
0 个
荣誉
0 个

尚未签到

发表于 2008-8-5 11:14 |显示全部楼层

淘宝网上40元-50元,不知是否支持bt3

如下是BT官方已该网卡列表

NetGear WG111v2

  • Driver : rtl8187/prism54(?)
  • Chipset : Realtek RTL-8187L / Intersil-Conexant GW3887
  • FCC ID : PY305400026 / PY3WG111V2

Be careful not all wg111v2 sticks have the realtek chipset the v2 with the word netgear set into the stick. To verify the differences, type `lsusb' when you have the device connected. Apparently, older versions of this card is equipped with Conexant and the later versions are with Realtek. There has been no easy way of identifying the difference between the two apart from checking the FCC ID or via plugging it in.

  • USB ID: 0846:6a00 is Realtek RTL-8187L chipset
  • USB ID: 0846:4240 is Intersil/Conexant GW3887 chipset (source)
  • RTL8187L users : Drivers are available on the forum however the range on this card in my opinion is poor.
  • GW3887 users : There has been some drivers floating around but the results shows that the driver is having difficulty communicating with any other wireless devices. It is possible to monitor (unverified), but any transmission may not work and/or causes system to do a hard lock. Ndiswrapper may help for the time being until kernel version 2.6.24 comes out with the p54 driver. For the eager ones, wireless-2.6 git may work with such cards but this again is not verified.
您需要登录后才可以回帖 登录 | 注册 微信登录

本版积分规则

Archiver | 手机版 | 无线门户 ( 粤ICP备11076993号|粤公网安备44010602008359号 ) |网站地图

GMT+8, 2025-7-16 21:15

返回顶部 返回列表