分类：设计开发    下载：0    浏览：330    时间：2026-01-28

1 SDK History .8 2 Version History.12 3 Overview of the Ralink AP Demo Board13 3.1 RT2880. 13 3.2 RT3052. 15 3.3 RT3883. 17 3.4 RT3352. 20 4 AP SDK source code overview22 5 Tool-chain 23 5.1 Install toolchain 23 5.2 Install LZMA Utility. 23 5.3 Install mksquashfs utility 23 6 Boot loader.24 6.1 Uboot Configuration  24 6.2 Build the uboot Image. 25 6.3 Burn the uboot image 25 7 User Library27 7.1 Library Configuration 27 7.2 Library Porting 27 7.3 Build user library. 28 8 User Application .29 8.1 Ralink Proprietary Applications. 8.1.1 ATED 29 8.1.2 REG. 29 8.1.3 FLASH 29 8.1.4 GPIO. 30 8.1.5 MII_MGR. 30 8.1.6 MTD. 31 8.1.7 NVRAM. 32 8.1.8 SPICMD. 33 8.1.9 I2CCMD . 33 8.1.10 Script. 33 8.2 goahead  33 8.3 nvram library  33 8.4 wsc_upnp . 34 8.5 iptables. 34 8.6 ntpclient. 34 8.7 mtd-utils 34 8.8 ppp-2.4.2. 34 8.9 bridge-utils 34 8.10 wireless_tools 35 8.11 inadyn . 35 8.12 zebra-0.95a_ripd . 35 8.13 wpa_supplicant-0.5.7 . 35 8.14 totd-1.5 35 8.15 samba-3.0.2 35 8.16 radvd-1.0  36 8.17 pptp-client 36 8.18 rp-l2tp-0.4 36 8.19 ctorrent-dnh3.2 36 8.20 dhcp6. 36 8.21 dnsmasq-2.40. 36 8.22 igmpproxy 37 8.23 matrixssl-1.8.3 37 8.24 rp-pppoe-3.8 37 8.25 usb_modeswitch-0.9.5 37 8.26 Port new user application . 38 9 Linux Kernel.40 9.1 Linux configuration . 40 9.2 Change Flash/DRAM Size 42 9.3 Change Switch Controller in RT2880 Platform. 42 9.4 Update User/Kernel default settings 43 9.5 Compile Linux image . 44 9.6 Port new Linux kernel module. 44 9.7 Execute commands at boot up time . 46 9.8 Add new files in RootFs 9.9 Image DownSize . 46 10 Flash Layout and Firmware Upgrade.50 10.1 Flash Layout 50 10.2 Firmware Upgrade 50 10.2.1 By Uboot  51 10.2.2 By WebUI 51 11 FAQ53 11.1 RT2880 Default password/UART/networking setting. 53 11.2 System requirements for the host platform 53 11.3 How to add new default parameter in flash. 54 11.3.1 Example 1 54 11.3.2 Example 2 54 11.4 Enable Ethernet Converter Feature  55 11.5 Change RF chip from RT2820 to RT2850 on the RT2880 platform. 57 11.6 How to change the Ethernet MAC address 57 11.7 How to configure GPIO ports 58 11.8 Use GPIO to turn on LED  59 11.9 Use LED firmware to turn on LED. 63 11.10 How to start the telnet server 66 11.10.1 busybox setting  66 11.10.2 Linux setting. 66 11.11 11n bit rate derivation 68 11.12 How to build a single image for the flash programmer  70 11.13 How to power down the rt305x Ethernet ports 72 11.14 How to enable NFS client 73 11.15 How to add a new language to the web UI. 75 11.16 How to enable watchdog in RT305x . 76 11.17 How to enable USB storage on the RT305x platform 76 11.18 How to enable USB automount on the RT305x platform. 78 11.19 How to enable software QoS . 78 11.20 Software QoS information . 81 11.20.1 Software QoS – Preface 81 11.20.2 Software QoS – Concept . 81 11.20.3 Software QoS – Usage  82 11.21 How to enable USB Ethernet (example for ASIX AX88XXX). 85 11.22 How to build a single image for the RT2880 8M flash platform 87 11.23 How to start a printer server (example for HP officejet 4355). 88 11.24 How to force the RT3052 link speed  90 11.25 How to verify IGMP snooping function . 92

分类：设计开发    下载：1    浏览：1563    时间：2021-08-10

基于 SoC Realtek RTL819X 开发的开源平台的固件和软件。

分类：设计开发    下载：6    浏览：1374    时间：2018-01-02

QCA9563 QSDK2016-4-27开发包及PDF说明。

分类：设计开发    下载：0    浏览：1289    时间：2017-09-04

Ralink SDK 配置uvc 摄像头的支持

分类：设计开发    下载：1    浏览：1267    时间：2017-09-04

Ralink RT5350 SDK编译教程

分类：设计开发    下载：2    浏览：1547    时间：2017-08-25

1 SDK History .................................................................................................................................. 9 2 Version History........................................................................................................................... 14 3 Overview of the Ralink AP Demo Board ................................................................................. 15 3.1 RT2880 .................................................................................................................................. 15 3.2 RT3052 .................................................................................................................................. 19 3.3 RT3883 .................................................................................................................................. 21 3.4 RT3352 .................................................................................................................................. 24 3.5 RT5350 .................................................................................................................................. 26 3.6 RT6855 .................................................................................................................................. 29 3.7 RT6856 .................................................................................................................................. 30 3.8 MT7620 .................................................................................................................................. 32 4 AP SDK source code overview ................................................................................................ 36 5 Tool-chain ................................................................................................................................... 37 5.1 Install toolchain ...................................................................................................................... 37 5.2 Install LZMA Utility................................................................................................................. 37 5.3 Install mksquashfs utility ....................................................................................................... 37 6 Boot loader ................................................................................................................................. 39 6.1 Uboot Configuration .............................................................................................................. 39 6.2 Build the uboot Image ........................................................................................................... 40 6.3 Burn the uboot image ........................................................................................................... 40 7 User Library ................................................................................................................................ 42 7.1 Library Configuration............................................................................................................. 42 7.2 Library Porting ........................................................................................................................ 42 7.3 Build user library .................................................................................................................... 43 8 User Application......................................................................................................................... 44 8.1 Ralink Proprietary Applications ........................................................................................... 44 8.1.1 ATED ............................................................................................................................. 44 8.1.2 REG ............................................................................................................................... 44 8.1.3 FLASH ........................................................................................................................... 44 8.1.4 GPIO .............................................................................................................................. 45 8.1.5 MII_MGR ....................................................................................................................... 45 8.1.6 MTD ............................................................................................................................... 46 8.1.7 NVRAM.......................................................................................................................... 47 8.1.8 SPICMD ........................................................................................................................ 48 8.1.9 I2CCMD ......................................................................................................................... 48 8.1.10 Script .............................................................................................................................. 49 8.2 goahead ................................................................................................................................. 49 8.3 nvram library .......................................................................................................................... 49 8.4 wsc_upnp ............................................................................................................................... 49 8.5 iptables ................................................................................................................................... 49 8.6 ntpclient .................................................................................................................................. 49 8.7 mtd-utils ................................................................................................................................. 50 8.8 ppp-2.4.2 ................................................................................................................................ 50 8.9 bridge-utils .............................................................................................................................. 50 8.10 wireless_tools ......................................................................................................................... 50 8.11 inadyn ..................................................................................................................................... 50 8.12 zebra-0.95a_ripd .................................................................................................................... 50 8.13 wpa_supplicant-0.5.7 ............................................................................................................ 51 8.14 totd-1.5 ................................................................................................................................... 51 8.15 samba-3.0.2 ........................................................................................................................... 51 8.16 radvd-1.0 ................................................................................................................................ 51 8.17 pptp-client ............................................................................................................................... 51 8.18 rp-l2tp-0.4 ............................................................................................................................... 51 8.19 ctorrent-dnh3.2 ...................................................................................................................... 52 8.20 dhcp6 ...................................................................................................................................... 52 8.21 dnsmasq-2.40 ........................................................................................................................ 52 8.22 igmpproxy ............................................................................................................................... 52 8.23 matrixssl-1.8.3 ........................................................................................................................ 52 8.24 rp-pppoe-3.8 ........................................................................................................................... 53 8.25 usb_modeswitch-0.9.5 .......................................................................................................... 53 8.26 Port new user application ..................................................................................................... 53 9 Linux Kernel ............................................................................................................................... 56 9.1 Linux configuration ................................................................................................................ 56 9.2 Change Flash/DRAM Size ................................................................................................... 58 9.3 Change Switch Controller in RT2880 Platform ................................................................. 58 9.4 Update User/Kernel default settings ................................................................................... 59 9.5 Compile Linux image ............................................................................................................ 60 9.6 Port new Linux kernel module ............................................................................................. 60 9.7 Execute commands at boot up time ................................................................................... 62 9.8 Add new files in RootFs ........................................................................................................ 62 9.9 Image DownSize ................................................................................................................... 62 10 Flash Layout and Firmware Upgrade ...................................................................................... 66 10.1 Flash Layout ........................................................................................................................... 66 10.2 Firmware Upgrade................................................................................................................. 67 10.2.1 By Uboot........................................................................................................................ 67 10.2.2 By WebUI ...................................................................................................................... 68 11 FAQ ............................................................................................................................................. 70 11.1 RT2880 Default password/UART/networking setting ...................................................... 70 11.2 System requirements for the host platform........................................................................ 70 11.3 How to add new default parameter in flash ....................................................................... 71 11.3.1 Example 1 ..................................................................................................................... 71 11.3.2 Example 2 ..................................................................................................................... 71 11.4 Enable Ethernet Converter Feature .................................................................................... 72 11.5 Change RF chip from RT2820 to RT2850 on the RT2880 platform .............................. 74 11.6 How to change the Ethernet MAC address ....................................................................... 74 11.7 How to configure GPIO ports ............................................................................................... 75 11.8 Use GPIO to turn on LED ..................................................................................................... 76 11.9 Use LED firmware to turn on LED ...................................................................................... 80 11.10 How to start the telnet server ............................................................................................... 83 11.10.1 busybox setting ............................................................................................................ 83 11.10.2 Linux setting .................................................................................................................. 83 11.11 11n bit rate derivation ........................................................................................................... 84 11.12 How to build a single image for the flash programmer .................................................... 87 11.13 How to power down the RT3x5x build-in 10/100 PHYs ................................................... 89 11.14 How to power down the RT6855/RT6856 build-in 10/100 PHYs ................................... 90 11.15 How to enable NFS client ..................................................................................................... 91 11.16 How to add a new language to the web UI ........................................................................ 92 11.17 How to enable watchdog ...................................................................................................... 93 11.18 How to enable USB storage on the RT305x platform ...................................................... 94 11.19 How to enable USB automount on the RT305x platform ................................................ 95 11.20 How to enable software QoS ............................................................................................... 96 11.21 Software QoS information .................................................................................................... 99 11.21.1 Software QoS – Preface ............................................................................................. 99 11.21.2 Software QoS – Concept ............................................................................................ 99 11.21.3 Software QoS – Usage ............................................................................................... 99 11.22 How to enable USB Ethernet (example for ASIX AX88XXX) ....................................... 103 11.23 How to build a single image for the RT2880 8M flash platform .................................... 104 11.24 How to start a printer server (example for HP officejet 4355) ....................................... 105 11.25 How to force the RT3052 link speed ................................................................................ 107 11.26 How to verify IGMP snooping function ............................................................................. 109 11.27 EHCI/OHCI USB Power Saving ........................................................................................ 110 11.28 Auto-frequency and Power Saving ................................................................................... 111 11.29 Concurrent AP porting Guide ............................................................................................ 116 11.30 SuperDMZ usage guide ..................................................................................................... 125 11.31 How to support IPv6 Ready Logo ..................................................................................... 126 11.32 How to enable iPerf tool ..................................................................................................... 128 11.33 How to enable ebtables ...................................................................................................... 129 11.34 How to enable IPv6 Rapid Deployment (6rd) .................................................................. 129 11.35 How to enable IPv6 DS-Lite ............................................................................................... 133 11.36 How to modify flash layout ................................................................................................. 137 11.37 How to reduce Linux FW size. ........................................................................................... 140 11.38 How to change internal GSW PHY Base Address. ........................................................ 141 11.39 How to support new USB 3G dongle ................................................................................ 141 11.40 How to enable USB 3G dongle function .......................................................................... 142

分类：设计开发    下载：21    浏览：2514    时间：2017-08-25

This SDK is a MTK customized OpenWrt project. To provide better compatibility and better stability, some OpenWrt drivers were replaced with MTK drivers, such as Ethernet, USB, WiFi, SD Card, etc. Brief Summary about this SDK: ·         OpenWrt framework: Barrier Breaker ·         Linux Kernel: 3.10.14 ·         Toolchain: toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2 ·         MTK Linux SDK base: linux-3.10.14 ·         Supported SoC Chips: MT7621, MT7628, MT7620 ·         Supported WiFi Chips: MT7603e, MT7602e, MT7612e, MT7628, MT7620, MT7610e

分类：设计开发    下载：12    浏览：2480    时间：2017-08-25

这个openwrt是MTK官方的OPENWRT，修补了一些问题，相比开源的openwrt会更加适合开发基于MTK芯片的SOC AP。 MTK_openwrt_7620_SDK_2.6.36.1

分类：设计开发    下载：11    浏览：1871    时间：2017-08-25

更多MTK SDK及编译教程请搜索本站。 MediaTek_ApSoC_SDK_4320

分类：设计开发    下载：8    浏览：1165    时间：2017-08-25

4200比较新，很多基于此版开发的固件。 文件较大，消耗金币亦设大。

分类：设计开发    下载：12    浏览：1410    时间：2017-08-25

这也是较早期的SDK，最新的SDK请搜索本站下载，同时本站也有MTK相关编译教程下载。

分类：设计开发    下载：2    浏览：1054    时间：2017-08-25

这是较早期的SDK，最新的SDK请搜索本站下载，同时本站也有MTK相关编译教程下载。