上校
- 注册时间
- 2018-9-11
- 金币
- 16519 个
- 威望
- 8 个
- 荣誉
- 0 个
累计签到：1501 天
连续签到：13 天
[LV.1825]无线元老
|
发表于 2020-5-28 21:35
本帖最后由 sun130128 于 2020-5-28 21:39 编辑
今天有时间折腾了，把手上的一个h3c wa1208e-gp-fit无线AP按照网上的方法 ，由FIT转换成FAT，结果失败了。。。。呜呜呜呜~~~~(>_<)~~~~
第一次刷机过程貌似正常如下
超级终端连电脑，弹出来的提示如下
System is starting...
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing............................Done!
****************************************************************************
* *
* H3C WA1208E BootWare, Version 3.09 *
* *
****************************************************************************
Copyright (c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Mar 9 2011
CPU Type : IXP422
CPU L1 Cache : 32KB
CPU Clock Speed : 266MHz
Memory Type : SDRAM
Memory Size : 64MB
Memory Speed : 133MHz
BootWare Size : 512KB
Flash Size : 8MB
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa1208_fat.bin!...........
.......................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
...............................Done!
System application is starting...
Startup configuration file does not exist.
User interface con0 is available.
Press ENTER to get started.
<WA1208E-GP>
#Dec 31 16:13:56:541 2008 WA1208E-GP SHELL/4/LOGIN:
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1<hh3cLogIn>: login from Console
%Dec 31 16:13:56:541 2008 WA1208E-GP SHELL/4/LOGIN: Console login from con0
<WA1208E-GP>
<WA1208E-GP>
******************************************************************************
* Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface con0 is available.
Please press ENTER.
<WA1208E-GP>
#Dec 31 16:35:42:820 2008 WA1208E-GP SHELL/4/LOGIN:
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1<hh3cLogIn>: login from Console
%Dec 31 16:35:42:821 2008 WA1208E-GP SHELL/4/LOGIN: Console login from con0
<WA1208E-GP>format flash
% Wrong device
<WA1208E-GP>format flash:
All data on flash: will be lost , proceed with format ? [Y/N]:y
............................
%Format flash: completed.
<WA1208E-GP>sys
System View: return to User View with Ctrl+Z.
[WA1208E-GP]System View: return to User View with Ctrl+Z.
^
% Unrecognized command found at '^' position.
[WA1208E-GP]int vlan 1
[WA1208E-GP-Vlan-interface1]ip add 192.168.1.1 255.255.255.0
[WA1208E-GP-Vlan-interface1]quit
[WA1208E-GP]quit
<WA1208E-GP>tftp 192.168.1.2 get wa1208h20_fat.bin
.
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait........................\
..........................................
TFTP: 6582384 bytes received in 63 second(s)
File downloaded successfully.
<WA1208E-GP>dir
Directory of flash:/
0 -rw- 6582384 Dec 31 2008 16:49:46 wa1208h20_fat.bin
6731 KB total (300 KB free)
<WA1208E-GP>boot-loader file flash:/wa1208h20_fat.bin
This command will set the boot file. Continue? [Y/N]:y
The boot file must be wa1208_fit.bin or wa1208_fat.bin!
Failed to set boot file on slot 1
<WA1208E-GP>
刷完后，开机不进系统了，网线连接提示一会本地连接成功，一会断线，反复如此
然后我就再用超级终端连电脑，弹出来的提示如下
System is starting...
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing............................Done!
****************************************************************************
* *
* H3C WA1208E BootWare, Version 3.09 *
* *
****************************************************************************
Copyright (c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Mar 9 2011
CPU Type : IXP422
CPU L1 Cache : 32KB
CPU Clock Speed : 266MHz
Memory Type : SDRAM
Memory Size : 64MB
Memory Speed : 133MHz
BootWare Size : 512KB
Flash Size : 8MB
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa1208_fat.bin!
The main application file does not exist--flash:/wa1208_fat.bin!
Booting App fails!
Protocol (FTP or TFTP) : ftp
Load File Name : wa1208_fat.bin
Target File Name : wa1208_fat.bin
Server IP Address : 192.168.0.1
Local IP Address : 192.168.0.50
Gateway IP Address : 0.0.0.0
FTP User Name : wa1208
FTP User Password : wa1208
Loading...
一直卡在loading中，各种时间按了Ctrl+B也没有用，求大佬帮我看看怎么救砖，谢谢大佬们，帮帮我！
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册
x
|
IP卡
狗仔卡
本来是可以发射无线的，我看有个H3C没有加密的信号删不掉，还有客户端模式打不开，我就以为是系统问题了，就开始了乱刷一通，如果我只用来接收无线信号转有线，是用胖好还是瘦好、、我现在这种情况还可以救砖吗？需要怎么操作，求大佬指教
