MW300R V6 TTL求助

xsm527

MW300R V6  TTL信息如下 ，但无法中断启动……求指教


ROMREBOOT
Enter in romStart!
Decompress the main image ......
Decompress the main image OK!


MT7620(MIPS32) BSP build at Jul  5 2013, 09:28:24.

The memory size set to 16MB, physical size is 16MB
enable ephy clock...done. rf reg 29 = 5
The CPU feqenuce set to 580 MHz

Readed system mac from flash: bc-d1-77-9f-73-0c
Conntrack init...
Conntrack init conntrack list ok
mem_initPool is been called: malloc 88*5120 (0x80ed3150 - 0x80f41150)
Conntrack entry (num: 5120) done.
conntrack hash table (size: 1280) done.
mem_initPool is been called: malloc 8*10240 (0x80ebf110 - 0x80ed3110)
Conntrack hash node (num: 10240) done.
conn_proto_gre_init() init done.
Conntrack proto handler done.
Conntrack fragment hash table (size: 32) done.
mem_initPool is been called: malloc 24*128 (0x80ebe4d0 - 0x80ebf0d0)
Conntrack fragment hash node (num: 128) done.
conntrack timer start.
mem_initPool is been called: malloc 44*5120 (0x80e87490 - 0x80ebe490)
Conntrack expect entry (num: 5120) done.
Conntrack expect tplhash table (size: 1280) done.
mem_initPool is been called: malloc 8*5120 (0x80e7d450 - 0x80e87450)
Conntrack expect tplhash node (num: 5120) done.
Conntrack expect addrhash table (size: 1280) done.
mem_initPool is been called: malloc 8*5120 (0x80e73410 - 0x80e7d410)
Conntrack expect addrhash node (num: 5120) done.
conntrack expect init done!
Conntrack helper (num: 100) done.
conntrack help init done!
Conntrack init done!
napt pt init ok!
napt init ok!
rule_init() 104 * 200!
Attaching interface lo0... done
a
Waitting for RX_DMA_BUSY status Start... done


Tx_Ring addr: 0xa0d1a880!!!

Rx_Ring addr: 0xa0d19860!!!
CDMA_CSG_CFG = 81000007
GDMA1_FWD_CFG = 20710000
Special Tag Disabled
Disable mt7620 PDMA!
Attached IPv4 interface to eth unit 0
usrNetBootConfig: Invalid Argument

Adding 6911 symbols for standalone.


  Creation date: Jul  5 2013, 09:28:24
l2filter_init(): L2Filter init OK!
mem_initPool is been called: malloc 12*10 (0x80ce53d0 - 0x80ce5448)
mem_initPool is been called: malloc 8*20 (0x80ce52f0 - 0x80ce5390)
initFtpAlg(): Done!
initTftpAlg(): Done!
mem_initPool is been called: malloc 32*40 (0x80ce4db0 - 0x80ce52b0)
mem_initPool is been called: malloc 20*20 (0x80ce4be0 - 0x80ce4d70)
alg_init(): ALG INIT OK
mem_initPool is been called: malloc 104*256 (0x80cde3a0 - 0x80ce4ba0)
mem_initPool is been called: malloc -> 16*256 (0x80cdd360 - 0x80cde360)
[ dm_loadCfg ] 2252:  software version is not match, in config, version = 4294967295
[ parseConfigNode ] 521:  Meet unrecognized object node "DynDnsCfg", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "NoipDnsCfg", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "SnmpCfg", skip the node
[ parseConfigNode ] 526:  Meet unrecognized parameter node "SourceMACFromVendorClassIDFilterExclude", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "X_TP_LANIPv6HostConfigManagement", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "X_TP_MultiSSID", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "QueueManagement", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "X_TP_IPTV", skip the node
[ msg_connSrv ] 269:  Can't connect server 7 and retry

[ msg_connSrv ] 269:  Can't connect server 11 and retry

ifMgr_getIfMac: Interface mr0 has NOT been attach to ip stack yet!
starting mirror0
starting mirror1
br0 setup done!
mr0 config done!
[ oal_intf_enableIntf ] 211:  to enable interface eth0 !
IP Detach eth0
eth0 attach to br0 done!
The initString info:
        phyNum=0!
        devNum=0!
        infType=4!
        irqNum=25!
        devType=0!
        privSize=0!
        csrAddr=0x7fffffff!
        devName=ra!


=== pAd = 80a3d9a0, size = 790920 ===

<-- RTMPAllocAdapterBlock, Status=0
AP Driver version-2.7.1.0
RtmpVxNetPoolInit(): malloc for clConfig[0] with size(162848)!
RtmpVxNetPoolInit(): malloc for clConfig[1] with size(1511456)!
rt28xx_ap_ioctl():Not supported ioctl cmd:0x8004651d!
INUM_TO_IVEC=344
RX DESC a08735a0  size = 1024
<-- RTMPAllocTxRxRingMemory, Status=0
RTMP_TimerListAdd: add timer obj 80ad0838!
RTMP_TimerListAdd: add timer obj 80a9bd6c!
RTMP_TimerListAdd: add timer obj 80a9bd4c!
RTMP_TimerListAdd: add timer obj 80a9bd2c!
RTMP_TimerListAdd: add timer obj 80a44600!
RTMP_TimerListAdd: add timer obj 80a4420c!
RTMP_TimerListAdd: add timer obj 80a445dc!
RTMP_TimerListAdd: add timer obj 80a448c0!
RTMP_TimerListAdd: add timer obj 80a4481c!
RTMP_TimerListAdd: add timer obj 80a44840!
RTMP_TimerListAdd: add timer obj 80a9e14c!
RTMP_TimerListAdd: add timer obj 80a9dd58!
RTMP_TimerListAdd: add timer obj 80a9e128!
RTMP_TimerListAdd: add timer obj 80a9e40c!
RTMP_TimerListAdd: add timer obj 80a9e170!
RTMP_TimerListAdd: add timer obj 80a9e194!
RTMP_TimerListAdd: add timer obj 80a9e1b8!
RTMP_TimerListAdd: add timer obj 80aa7214!
RTMP_TimerListAdd: add timer obj 80aa72e8!
RTMP_TimerListAdd: add timer obj 80aa7234!
RTMP_TimerListAdd: add timer obj 80a9e544!
--->RtmpNetTaskInit
<---RtmpNetTaskInit
RTMP_TimerListAdd: add timer obj 80a41b88!
RTMP_TimerListAdd: add timer obj 80a9e490!
Error opening profile "thifname=br0
session_timeout_interval=0
MaxStaNum=31
IgmpSnEnable=1
EfuseBufferMode=1
"
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
E2PROM: D0 target power=0xff20
E2PROM: 40 MW Power Delta= 0
3. Phy Mode = 9
RTMP_TimerListAdd: add timer obj 80a41788!
AntCfgInit: primary/secondary ant 0/1
Initialize RF Central Registers for E2 !!!
Initialize RF Central Registers for E3 !!!
Initialize RF Channel Registers for E2 !!!
Initialize RF Channel Registers for E3 !!!
Initialize RF DCCal Registers for E2 !!!
Initialize RF DCCal Registers for E3 !!!
D1 = 2, D2 = 3, CalCode = 2 !!!
TX BW Filter Calibration !!!
RX BW Filter Calibration !!!
LOFT Calibration Done!
IQCalibration Start!
IQCalibration Done! CH = 0, (gain= 0, phase=3c)
IQCalibration Start!
IQCalibration Done! CH = 1, (gain= 0, phase=3d)
TX IQ Calibration Done!
Sigma_i=618, Sigma_q=616, R_iq=50
G_imb=0, Ph_rx=0
Sigma_i=228, Sigma_q=231, R_iq=-180
G_imb=1, Ph_rx=-7
RTMPSetPhyMode: channel is out of range, use first channel=0
MCS Set = ff ff 00 00 01
SYNC - BBP R4 to 20MHz.l
Link Status Changed - Port2 Link UP. (04)
RTMP_TimerListAdd: add timer obj 80a9eaf8!
ADC clcok selection for E3 !!!
Shielding clock selection !!!
Main bssid = bc:d1:77:9f:73:0c
<==== rt28xx_init, Status=0
availableNum(0) devInitStr =0:4:0:1024:4:0:apcli
rt28xx_ap_ioctl():Not supported ioctl cmd:0x8004651d!
pAd->int_enable_reg=0x3fffc
Enrollee PinCode(ra0)           33583549
[ oal_wlan_openVap ] 1279:  Current addHver is 0x1

rt28xx_ap_ioctl():Not supported ioctl cmd:0xc00c6516!
rt28xx_ap_ioctl():Not supported ioctl cmd:0x40046514!
ra0 attach to br0 done!
rt28xx_ap_ioctl():Not supported ioctl cmd:0xc00c6516!
rt28xx_ap_ioctl():Not supported ioctl cmd:0x40046514!
apcli0 attach to br0 done!
[ msg_connSrv ] 269:  Can't connect server 8 and retry

[ msg_connSrv ] 269:  Can't connect server 8 and retry

[ msg_connSrv ] 269:  Can't connect server 8 and retry

[ msg_connSrv ] 269:  Can't connect server 8 and retry

mem_initPool is been called: malloc 60*64 (0x80856b10 - 0x80857a10)
[ msg_connSrv ] 269:  Can't connect server 9 and retry

tc_core_init(): psched_tick_per_us=983040 psched_us_per_tick=1000000    clock_factor=1.000000 tick_in_used=0.983040
HTB ROOT QDISC:  size=1232
+ HTB CLASS:  size=98832
tc_htb_init:  addr=0x808321e0  endAddr=0x8084a3f0  rootqNum=2  classMaxNum=40
SFQ QDISC:  size=129880
tc_sfq_init:  addr=0x80812670  endAddr=0x808321c8  ruleNum=34
PFIFO QDISC:  size=1000
tc_fifo_init:  addr=0x80812270  endAddr=0x80812658  ruleNum=10
FW FILTER:  size=1728
tc_fw_init:  addr=0x80811ba0  endAddr=0x80812260  num=36
Cannot find the device which name is eth1!
no interface name: eth1 found!
ifMgr_setIfDown(): Get interface failed!
[ oal_intf_disableIntf ] 238:  Disable interface eth1 failed!
set mii port 0 value 0x00003100
no interface name: eth1 found!
ifMgr_ifIsUp(): Get interface failed!
[ oal_wan_startL3Interface ] 564:  Start interface eth1 (layer2 ifName=eth1)
no interface name: eth1 found!
no interface name: eth1 found!
Vlan ID 0 is wrong
ifMgr_setIfMac: Interface eth1 NOT been attach to ip stack yet!
[ oal_intf_enableIntf ] 211:  to enable interface eth1 !
eth1 config done!
username:aaaaaaaaaaaaaaaaa[ msg_connSrv ] 269:  Can't connect server 13 and retry

alg_open(): OK 0
alg_open(): OK 5
delVpnRule() ERROR.
alg_open(): OK 1
delVpnRule() ERROR.
alg_open(): OK 3
delVpnRule() ERROR.
alg_open(): OK 2
Enable mt7620 PDMA!
ROMREBOOT
Enter in romStart!
Decompress the main image ......
Decompress the main image OK!


MT7620(MIPS32) BSP build at Jul  5 2013, 09:28:24.

The memory size set to 16MB, physical size is 16MB
enable ephy clock...done. rf reg 29 = 5
The CPU feqenuce set to 580 MHz

Readed system mac from flash: bc-d1-77-9f-73-0c
Conntrack init...
Conntrack init conntrack list ok
mem_initPool is been called: malloc 88*5120 (0x80ed3150 - 0x80f41150)
Conntrack entry (num: 5120) done.
conntrack hash table (size: 1280) done.
mem_initPool is been called: malloc 8*10240 (0x80ebf110 - 0x80ed3110)
Conntrack hash node (num: 10240) done.
conn_proto_gre_init() init done.
Conntrack proto handler done.
Conntrack fragment hash table (size: 32) done.
mem_initPool is been called: malloc 24*128 (0x80ebe4d0 - 0x80ebf0d0)
Conntrack fragment hash node (num: 128) done.
conntrack timer start.
mem_initPool is been called: malloc 44*5120 (0x80e87490 - 0x80ebe490)
Conntrack expect entry (num: 5120) done.
Conntrack expect tplhash table (size: 1280) done.
mem_initPool is been called: malloc 8*5120 (0x80e7d450 - 0x80e87450)
Conntrack expect tplhash node (num: 5120) done.
Conntrack expect addrhash table (size: 1280) done.
mem_initPool is been called: malloc 8*5120 (0x80e73410 - 0x80e7d410)
Conntrack expect addrhash node (num: 5120) done.
conntrack expect init done!
Conntrack helper (num: 100) done.
conntrack help init done!
Conntrack init done!
napt pt init ok!
napt init ok!
rule_init() 104 * 200!
Attaching interface lo0... done

Waitting for RX_DMA_BUSY status Start... done


Tx_Ring addr: 0xa0d1a880!!!

Rx_Ring addr: 0xa0d19860!!!
CDMA_CSG_CFG = 81000007
GDMA1_FWD_CFG = 20710000
Special Tag Disabled
Disable mt7620 PDMA!
Attached IPv4 interface to eth unit 0
usrNetBootConfig: Invalid Argument
p
Adding 6911 symbols for standalone.


  Creation date: Jul  5 2013, 09:28:24
l2filter_init(): L2Filter init OK!
mem_initPool is been called: malloc 12*10 (0x80ce53d0 - 0x80ce5448)
mem_initPool is been called: malloc 8*20 (0x80ce52f0 - 0x80ce5390)
initFtpAlg(): Done!
initTftpAlg(): Done!
mem_initPool is been called: malloc 32*40 (0x80ce4db0 - 0x80ce52b0)
mem_initPool is been called: malloc 20*20 (0x80ce4be0 - 0x80ce4d70)
alg_init(): ALG INIT OK
mem_initPool is been called: malloc 104*256 (0x80cde3a0 - 0x80ce4ba0)
mem_initPool is been called: malloc -> 16*256 (0x80cdd360 - 0x80cde360)
[ dm_loadCfg ] 2252:  software version is not match, in config, version = 4294967295
[ parseConfigNode ] 521:  Meet unrecognized object node "DynDnsCfg", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "NoipDnsCfg", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "SnmpCfg", skip the node
[ parseConfigNode ] 526:  Meet unrecognized parameter node "SourceMACFromVendorClassIDFilterExclude", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "X_TP_LANIPv6HostConfigManagement", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "X_TP_MultiSSID", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "QueueManagement", skip the node
[ parseConfigNode ] 521:  Meet unrecognized object node "X_TP_IPTV", skip the node
[ msg_connSrv ] 269:  Can't connect server 7 and retry

[ msg_connSrv ] 269:  Can't connect server 11 and retry

ifMgr_getIfMac: Interface mr0 has NOT been attach to ip stack yet!
starting mirror0
starting mirror1
br0 setup done!
mr0 config done!
[ oal_intf_enableIntf ] 211:  to enable interface eth0 !
IP Detach eth0
eth0 attach to br0 done!
The initString info:
        phyNum=0!
        devNum=0!
        infType=4!
        irqNum=25!
        devType=0!
        privSize=0!
        csrAddr=0x7fffffff!
        devName=ra!


=== pAd = 80a3d9a0, size = 790920 ===

<-- RTMPAllocAdapterBlock, Status=0
AP Driver version-2.7.1.0
RtmpVxNetPoolInit(): malloc for clConfig[0] with size(162848)!
RtmpVxNetPoolInit(): malloc for clConfig[1] with size(1511456)!
rt28xx_ap_ioctl():Not supported ioctl cmd:0x8004651d!
INUM_TO_IVEC=344
RX DESC a08735a0  size = 1024
<-- RTMPAllocTxRxRingMemory, Status=0
RTMP_TimerListAdd: add timer obj 80ad0838!
RTMP_TimerListAdd: add timer obj 80a9bd6c!
RTMP_TimerListAdd: add timer obj 80a9bd4c!
RTMP_TimerListAdd: add timer obj 80a9bd2c!
RTMP_TimerListAdd: add timer obj 80a44600!
RTMP_TimerListAdd: add timer obj 80a4420c!
RTMP_TimerListAdd: add timer obj 80a445dc!
RTMP_TimerListAdd: add timer obj 80a448c0!
RTMP_TimerListAdd: add timer obj 80a4481c!
RTMP_TimerListAdd: add timer obj 80a44840!
RTMP_TimerListAdd: add timer obj 80a9e14c!
RTMP_TimerListAdd: add timer obj 80a9dd58!
RTMP_TimerListAdd: add timer obj 80a9e128!
RTMP_TimerListAdd: add timer obj 80a9e40c!
RTMP_TimerListAdd: add timer obj 80a9e170!
RTMP_TimerListAdd: add timer obj 80a9e194!
RTMP_TimerListAdd: add timer obj 80a9e1b8!
RTMP_TimerListAdd: add timer obj 80aa7214!
RTMP_TimerListAdd: add timer obj 80aa72e8!
RTMP_TimerListAdd: add timer obj 80aa7234!
RTMP_TimerListAdd: add timer obj 80a9e544!
--->RtmpNetTaskInit
<---RtmpNetTaskInit
RTMP_TimerListAdd: add timer obj 80a41b88!
RTMP_TimerListAdd: add timer obj 80a9e490!
Error opening profile "thifname=br0
session_timeout_interval=0
MaxStaNum=31
IgmpSnEnable=1
EfuseBufferMode=1
"
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
E2PROM: D0 target power=0xff20
E2PROM: 40 MW Power Delta= 0
3. Phy Mode = 9
RTMP_TimerListAdd: add timer obj 80a41788!
AntCfgInit: primary/secondary ant 0/1
Initialize RF Central Registers for E2 !!!
Initialize RF Central Registers for E3 !!!
Initialize RF Channel Registers for E2 !!!
Initialize RF Channel Registers for E3 !!!
Initialize RF DCCal Registers for E2 !!!
Initialize RF DCCal Registers for E3 !!!
D1 = 2, D2 = 3, CalCode = 2 !!!
TX BW Filter Calibration !!!
RX BW Filter Calibration !!!
LOFT Calibration Done!
IQCalibration Start!
IQCalibration Done! CH = 0, (gain= f, phase=3d)
IQCalibration Start!
IQCalibration Done! CH = 1, (gain= 0, phase=3d)
TX IQ Calibration Done!
Sigma_i=615, Sigma_q=615, R_iq=640
G_imb=0, Ph_rx=3
Sigma_i=225, Sigma_q=226, R_iq=-170
G_imb=0, Ph_rx=-7
RTMPSetPhyMode: channel is out of range, use first channel=0
MCS Set = ff ff 00 00 01
SYNC - BBP R4 to 20MHz.l
Link Status Changed - Port2 Link UP. (04)
===>RtmpOSWrielessEventSend eventType=0x8c02
RTMP_TimerListAdd: add timer obj 80a9eaf8!
ADC clcok selection for E3 !!!
Shielding clock selection !!!
Main bssid = bc:d1:77:9f:73:0c
<==== rt28xx_init, Status=0
availableNum(0) devInitStr =0:4:0:1024:4:0:apcli
rt28xx_ap_ioctl():Not supported ioctl cmd:0x8004651d!
pAd->int_enable_reg=0x3fffc
Enrollee PinCode(ra0)           33583549
[ oal_wlan_openVap ] 1279:  Current addHver is 0x1

rt28xx_ap_ioctl():Not supported ioctl cmd:0xc00c6516!
rt28xx_ap_ioctl():Not supported ioctl cmd:0x40046514!
ra0 attach to br0 done!
rt28xx_ap_ioctl():Not supported ioctl cmd:0xc00c6516!
rt28xx_ap_ioctl():Not supported ioctl cmd:0x40046514!
apcli0 attach to br0 done!
[ msg_connSrv ] 269:  Can't connect server 8 and retry

[ msg_connSrv ] 269:  Can't connect server 8 and retry

===>RtmpOSWrielessEventSend eventType=0x8c02
===>RtmpOSWrielessEventSend eventType=0x8c02
[ msg_connSrv ] 269:  Can't connect server 8 and retry

[ msg_connSrv ] 269:  Can't connect server 8 and retry

mem_initPool is been called: malloc 60*64 (0x80856b10 - 0x80857a10)
[ msg_connSrv ] 269:  Can't connect server 9 and retry

tc_core_init(): psched_tick_per_us=983040 psched_us_per_tick=1000000    clock_factor=1.000000 tick_in_used=0.983040
HTB ROOT QDISC:  size=1232
+ HTB CLASS:  size=98832
tc_htb_init:  addr=0x808321e0  endAddr=0x8084a3f0  rootqNum=2  classMaxNum=40
SFQ QDISC:  size=129880
tc_sfq_init:  addr=0x80812670  endAddr=0x808321c8  ruleNum=34
PFIFO QDISC:  size=1000
tc_fifo_init:  addr=0x80812270  endAddr=0x80812658  ruleNum=10
FW FILTER:  size=1728
tc_fw_init:  addr=0x80811ba0  endAddr=0x80812260  num=36
Cannot find the device which name is eth1!
no interface name: eth1 found!
ifMgr_setIfDown(): Get interface failed!
[ oal_intf_disableIntf ] 238:  Disable interface eth1 failed!
set mii port 0 value 0x00003100
no interface name: eth1 found!
ifMgr_ifIsUp(): Get interface failed!
[ oal_wan_startL3Interface ] 564:  Start interface eth1 (layer2 ifName=eth1)
no interface name: eth1 found!
no interface name: eth1 found!
Vlan ID 0 is wrong
ifMgr_setIfMac: Interface eth1 NOT been attach to ip stack yet!
[ oal_intf_enableIntf ] 211:  to enable interface eth1 !
eth1 config done!
username:ppppppppppppppppp[ msg_connSrv ] 269:  Can't connect server 13 and retry

alg_open(): OK 0
alg_open(): OK 5
delVpnRule() ERROR.
alg_open(): OK 1
delVpnRule() ERROR.
alg_open(): OK 3
delVpnRule() ERROR.
alg_open(): OK 2
Enable mt7620 PDMA!
===>RtmpOSWrielessEventSend eventType=0x8c02
===>RtmpOSWrielessEventSend eventType=0x8c02

99wudi

正在搞，放弃了。2+16m，2m闪存改16m好改，16m内存不好改。不改内存，试着反复刷breed，各种openwtr，失败。最后也懒得拆那个16m闪存了。直接16m闪存刷会原厂。收工

xsm527

99wudi 发表于 2018-12-26 16:36
正在搞，放弃了。2+16m，2m闪存改16m好改，16m内存不好改。不改内存，试着反复刷breed，各种openwtr，失败 ...

主要我是之前升级错了版本出现了一些问题，想重新刷一下！

xsm527

xsm527 发表于 2019-1-2 18:37
主要我是之前升级错了版本出现了一些问题，想重新刷一下！

求教怎么刷

xsm527

无线恩施门户 发表于 2019-1-4 11:12
确定是这个值？？

其他我也试了，都是乱码！