请问 Backtrack5R3安装磊科NW338网卡驱动出现这个

joyzone

请问 Backtrack5R3安装磊科NW338网卡驱动，编译的时候出现这个是怎么回事？

lizy0327

如果是编译的问题，一般就是缺少gcc/c++/dev这样的开发包，不知道对你有没有帮助

joyzone

可我是按照RTL8712(8188_8191_8192SU) USB Linux Driver Quick Installation Guide就是这么安装的呀。

joyzone

看网上好多人安装这个驱动都出现了。Authentication requested [root] for make driver: make ARCH=i386
CROSS_COMPILE= -C /lib/modules/3.0.0-12-generic/build
M=/home/karl/rtl8188cus/driver/rtl8192_8188CU_linux_v3.1.2590.20110922
modules make[1]: Entering directory
`/usr/src/linux-headers-3.0.0-12-generic'   CC [M]
/home/karl/rtl8188cus/driver/rtl8192_8188CU_linux_v3.1.2590.20110922/core/rtw_cmd.o
In file included from
/home/karl/rtl8188cus/driver/rtl8192_8188CU_linux_v3.1.2590.20110922/core/rtw_cmd.c:24:0:
/home/karl/rtl8188cus/driver/rtl8192_8188CU_linux_v3.1.2590.20110922/include/osdep_service.h:49:29:
fatal error: linux/smp_lock.h: No such file or directory compilation
terminated. make[2]: ***
[/home/karl/rtl8188cus/driver/rtl8192_8188CU_linux_v3.1.2590.20110922/core/rtw_cmd.o]
Error 1 make[1]: ***
[_module_/home/karl/rtl8188cus/driver/rtl8192_8188CU_linux_v3.1.2590.20110922] Error 2 make[1]: Leaving directory
`/usr/src/linux-headers-3.0.0-12-generic' make: *** [modules] Error 2
Compile make driver error: 2, Please check error Mesg

joyzone

求助啊: ubuntu10.10 安装磊科NW336无线网卡驱动 失败!!!!!

机器情况是: I5 2300的CPU, 64位的ubuntu10.10
无线网卡是 磊科NW336, 芯片是RTL8712.

我按照网卡带的驱动盘中的安装说明, 照着做都不能成功.
以下来自于RTL8188SU USB网卡的文档:
Part 1: make 8712 USB Linux driver

(1) step1: uncompress the “rtl8712_8188_8191_8192SU_usb_linux_v2.6.x.x.2010xxxx.tar.gz” file. (in “driver” directory)
> tar zxvf rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20100625.tar.gz
(2) step2: make 8712 USB driver module
> make
(3) step3: clean the operation environment
> ./clean
(4) step4: insert 8712 USB modules
> insmod 8712u.ko
(5) step5: enable wlan0 interface
> ifconfig wlan0 up     (在这步的时候, 提示找不到device)
(6) step6: setup IP address
> ifconfig wlan0 192.168.1.100
Part 2: Site Survey & connect to AP without security

step1: Site Survey
> iwlist wlan0 scan

(2) step2: Connect to AP
> iwconfig wlan0 essid “xxx”

joyzone

At the beginning - this are my first steps with linux so my knowledge is limited, also sorry for my english.

I bought Pentagram P6132-10 USB Wireless cards with RTL8188SU chipset. To find drivers for it I have did update and upgrade of BT4 - without positive result. On the net I found dedicated drivers RTL8188SU_usb_linux_v2.6.0006.20100511.zip with inside *.tar.gz file. Inside archive I found also installation documentation and following it:

Part 1: make 8712 USB Linux driver

step1: uncompress the “rtl8712_8188_8191_8192SU_usb_linux_v2.6.xxxx.2010 xxxx.tar.gz” file. (in “driver” directory)
> tar zxvf rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511.tar.gz

"driver directory" - exactly don't know which one is proper so I was trying direct on root, and also in /usr/src/drivers/compat-wireless-2010-07-10/drivers/net/wireless



step2: make 8712 USB driver module
> make

root@bt:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511# make

make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.34/build M=/root/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511 mod
ules
make[1]: Entering directory `/usr/src/linux-source-2.6.34'

WARNING: Symbol version dump /usr/src/linux-source-2.6.34/Module.symvers
is missing; modules will have no dependencies and modversions.


And log of unpacking files


step3: clean the operation environment
> ./clean


After execute this command popup:

root@bt:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511# ./clean
ERROR: Module r8192s_usb does not exist in /proc/modules
ERROR: Module ieee80211_rsl does not exist in /proc/modules
ERROR: Module ieee80211_crypt_ccmp does not exist in /proc/modules
ERROR: Module ieee80211_crypt_tkip does not exist in /proc/modules
ERROR: Module ieee80211_crypt_wep does not exist in /proc/modules
ERROR: Module ieee80211_crypt does not exist in /proc/modules

following procedure next step is

step4: insert 8712 USB modules
> insmod 8712u.ko

root@bt:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511# insmod 8712u.ko
insmod: error inserting '8712u.ko': -1 File exists

step5: enable wlan0 interface
> ifconfig wlan0 up

root@bt:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511# ifconfig wlan0 up

root@bt:~/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 511# airmon-ng start wlan0


Interface Chipset Driver


And that's it - the backtrack can't find my USB wireless card. At this moment also I reboot Backtrack and result is this same. What I'm doing wrong ? Could anyone guide me how to correct install drivers ?

joyzone

lizy0327 发表于 2015-1-30 14:27
如果是编译的问题，一般就是缺少gcc/c++/dev这样的开发包，不知道对你有没有帮助

lizy0327！你说得这个根本没解决这个问题呀。