帮我看看这是什么问题pppoe-wan: renamed from ppp0

oozj

[   39.205101] br-lan: topology change detected, propagating
[   39.205123] br-lan: port 1(eth1) entered forwarding state
[   39.205124] br-lan: topology change detected, propagating
[   39.205132] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[  229.261100] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[15112.200979] 8021q: adding VLAN 0 to HW filter on device eth0
[15112.260988] 8021q: adding VLAN 0 to HW filter on device eth0
[15115.457110] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[15115.544755] pppoe-wan: renamed from ppp0
[42195.955846] 8021q: adding VLAN 0 to HW filter on device eth0
[42196.015847] 8021q: adding VLAN 0 to HW filter on device eth0
[42199.035970] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[42199.239613] pppoe-wan: renamed from ppp0
[48033.897635] 8021q: adding VLAN 0 to HW filter on device eth0
[48033.957642] 8021q: adding VLAN 0 to HW filter on device eth0
[48037.381763] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[48037.589396] pppoe-wan: renamed from ppp0
[73188.409031] 8021q: adding VLAN 0 to HW filter on device eth0
[73188.469014] 8021q: adding VLAN 0 to HW filter on device eth0
[73192.005141] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[73192.096770] pppoe-wan: renamed from ppp0
[98182.780170] 8021q: adding VLAN 0 to HW filter on device eth0
[98182.844178] 8021q: adding VLAN 0 to HW filter on device eth0
[98185.964286] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[98186.151971] pppoe-wan: renamed from ppp0
[101891.888170] 8021q: adding VLAN 0 to HW filter on device eth0
[101891.948180] 8021q: adding VLAN 0 to HW filter on device eth0
[101895.508295] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[101895.583898] pppoe-wan: renamed from ppp0
[133888.993569] 8021q: adding VLAN 0 to HW filter on device eth0
[133889.053608] 8021q: adding VLAN 0 to HW filter on device eth0
[133892.229733] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[133892.425347] pppoe-wan: renamed from ppp0
[221988.104157] 8021q: adding VLAN 0 to HW filter on device eth0
[221988.164187] 8021q: adding VLAN 0 to HW filter on device eth0
[221991.880276] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[221992.091911] pppoe-wan: renamed from ppp0
[247333.615399] 8021q: adding VLAN 0 to HW filter on device eth0
[247333.687411] 8021q: adding VLAN 0 to HW filter on device eth0
[247337.195511] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[247337.395150] pppoe-wan: renamed from ppp0
[306332.836057] 8021q: adding VLAN 0 to HW filter on device eth0
[306332.896134] 8021q: adding VLAN 0 to HW filter on device eth0
[306336.424235] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[306336.499846] pppoe-wan: renamed from ppp0
[326584.257540] 8021q: adding VLAN 0 to HW filter on device eth0
[326584.317538] 8021q: adding VLAN 0 to HW filter on device eth0
[326587.461646] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[326587.669291] pppoe-wan: renamed from ppp0
[335056.101704] 8021q: adding VLAN 0 to HW filter on device eth0
[335056.161787] 8021q: adding VLAN 0 to HW filter on device eth0
[335059.721884] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[335059.913516] pppoe-wan: renamed from ppp0
[376370.188852] 8021q: adding VLAN 0 to HW filter on device eth0
[376370.248931] 8021q: adding VLAN 0 to HW filter on device eth0
[376373.821026] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[376373.928675] pppoe-wan: renamed from ppp0
[450482.054752] TCP: request_sock_TCP: Possible SYN flooding on port 5000. Sending cookies.  Check SNMP counters.
[453335.294613] 8021q: adding VLAN 0 to HW filter on device eth0
[453335.354600] 8021q: adding VLAN 0 to HW filter on device eth0
[453338.554714] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[453338.770370] pppoe-wan: renamed from ppp0
[460976.113195] mmc0: cqhci: timeout for tag 3
[460976.117860] mmc0: cqhci: ============ CQHCI REGISTER DUMP ===========
[460976.125178] mmc0: cqhci: Caps:      0x000030c0 | Version:  0x00000510
[460976.132453] mmc0: cqhci: Config:    0x00001101 | Control:  0x00000000
[460976.139736] mmc0: cqhci: Int stat:  0x00000000 | Int enab: 0x00000006
[460976.147013] mmc0: cqhci: Int sig:   0x00000006 | Int Coal: 0x00000000
[460976.154290] mmc0: cqhci: TDL base:  0x76b33000 | TDL up32: 0x00000002
[460976.161568] mmc0: cqhci: Doorbell:  0x80100d08 | TCN:      0x00000000
[460976.168833] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000008
[460976.176121] mmc0: cqhci: Task clr:  0x00000000 | SSC1:     0x00010008
[460976.183385] mmc0: cqhci: SSC2:      0x00000001 | DCMD rsp: 0x00000000
[460976.190657] mmc0: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x00000000
[460976.197939] mmc0: cqhci: Resp idx:  0x0000000d | Resp arg: 0x00000000
[460976.205226] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[460976.212505] mmc0: sdhci: Sys addr:  0x00000030 | Version:  0x00001002
[460976.219774] mmc0: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000000
[460976.227036] mmc0: sdhci: Argument:  0x00018000 | Trn mode: 0x00000023
[460976.234307] mmc0: sdhci: Present:   0x1fff0001 | Host ctl: 0x0000003c
[460976.241576] mmc0: sdhci: Power:     0x0000000b | Blk gap:  0x00000080
[460976.248843] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[460976.256110] mmc0: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[460976.263373] mmc0: sdhci: Int enab:  0x02ff4000 | Sig enab: 0x02ff4000
[460976.270636] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[460976.277899] mmc0: sdhci: Caps:      0x546ec881 | Caps_1:   0x80000807
[460976.285160] mmc0: sdhci: Cmd:       0x00000d1a | Max curr: 0x00000000
[460976.292425] mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
[460976.299685] mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[460976.306944] mmc0: sdhci: Host ctl2: 0x0000000d
[460976.311982] mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x0000000275c03048
[460976.320011] mmc0: sdhci: ============================================
[460976.327401] mmc0: running CQE recovery
[518671.882357] 8021q: adding VLAN 0 to HW filter on device eth0
[518671.942353] 8021q: adding VLAN 0 to HW filter on device eth0
[518675.470450] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[518675.570105] pppoe-wan: renamed from ppp0