ROS软路由开启配置UPNP

用易-小卢

ip upnp set enabled=yes
ip upnp interfaces add interface=pppoe-out1 type=external disabled=no
ip upnp interfaces add interface=bridge-local type=internal disabled=no
5 s" B) B3 p3 L/ @1 d
4 I/ E$ S$ u$ ~启动支持UPNP的软件进行测试，如迅雷：ip firewall nat print all
chain=srcnat action=masquerade out-interface=pppoe-out1
8 a9 b" @9 N# g' e. c" a& [1 a* H  I# Gchain=dstnat action=dst-nat to-addresses=192.168.1.250 to-ports=41019 protocol=tcp\
( g/ H$ |/ S% Y; h* qdst-address=8.8.8.8 dst-port=41019
chain=dstnat action=dst-nat to-addresses=192.168.1.250 to-ports=64677 protocol=udp\
dst-address=8.8.8.8 dst-port=41019