czy1 发表于 2016-4-14 10:37

WR840nv2 刷成wr800nv1,怎样刷回原厂固件wr840nv2

WR840nv2 刷成wr800nv1,怎样刷回原厂固件wr840nv2

below63 发表于 2016-4-14 12:47

你怎么刷过去的就怎么刷回咯真是无聊的问题{:1_1:}找固件不就行

czy1 发表于 2016-4-15 11:41

below63 发表于 2016-4-14 12:47
你怎么刷过去的就怎么刷回咯真是无聊的问题找固件不就行

刷原厂固件wr840nv2，重起后还是wr800nv1
      ________________             __      ______   ___   ___
      |________||   ___|         ||    |||    \ | ||| //
         ||   ||___| |   __ __   ||    |||   \| |||//
         ||   |   _____||__ __|||___ ||| |\   ||      \
         |__|   |__|               |______||__||_| \____||__|\___\


                            Software Platform for MIPS
Creation date: Jul5 2011, 09:13:06 (huangqingjia@tp-link.net)
Copyright(C) 2001-2012 by TP-LINK TECHNOLOGIES CO., LTD.
CPU: AR9341: AP123 Board
CPU freq: 500 MHZ
SDRAM size: 16 MB
ipaddr:192.168.1.1
serverip:192.168.1.100
file:vxWorks.img


Press Ctrl+C to stop auto-boot...
Stop auto-boot...
Attaching interface lo0... done
Rx clbufs 512 each of size 1756
eth_rx_netpool_init: allocated, pDmaBuf=0x80eaf110, buffend = 80f8b914
ATHRS27: resetting s27
ATHRS27: s27 reset done
eth_rx_netpool_init: done already!
interrupt: enet1 port2 up
interrupt: LAN Port Interface type is 0x4c04
interrupt: enet1 port2 down
Attached IPv4 interface to eth unit 0
#
# interrupt: enet1 port2 up
interrupt: LAN Port Interface type is 0x4c04
interrupt: enet1 port2 down
interrupt: enet1 port2 up
interrupt: LAN Port Interface type is 0x4c04
update vxWorks 192.168.1.100 wr840nv2-cn-up.bin
TFTP from server 192.168.1.100;
our IP address is 192.168.1.1;
Filename 'wr840nv2-cn-up.bin'
Downloading... 1352804
Bad Magic Number,0014A450
Usage error.
update          update

要不你能给个固件来吗？

yqyapple 发表于 2018-9-19 23:34

没有刷进去吧
页: [1]
查看完整版本: WR840nv2 刷成wr800nv1,怎样刷回原厂固件wr840nv2