新兵上阵
- 注册时间
- 2014-7-27
- 金币
- 43 个
- 威望
- 0 个
- 荣誉
- 0 个
累计签到:2 天 连续签到:0 天 [LV.20]漫游旅程
|
发表于 2017-10-16 16:41
我有一模一样的一大堆,可用给你修复
U-Boot 1.1.4 (Aug 19 2015 - 08:58:22)
BHU Urouter
DRAM:
sri
Wasp 1.1
wasp_ddr_initial_config(249): (16bit) ddr2 init
wasp_ddr_initial_config(426): Wasp ddr init done
Tap value selected = 0xf [0x0 - 0x1f]
Setting 0xb8116290 to 0x18302d0f
64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 270k for U-Boot at: 83fbc000
Reserving 192k for malloc() at: 83f8c000
Reserving 44 Bytes for Board Info at: 83f8bfd4
Reserving 36 Bytes for Global Data at: 83f8bfb0
Reserving 128k for boot params() at: 83f6bfb0
Stack Pointer at: 83f6bf98
Now running in RAM - U-Boot at: 83fbc000
Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18
flash size 16MB, sector count = 256
Flash: 16 MB
In: serial
Out: serial
Err: serial
______ _ _ _ _
|_____] |_____| | |
|_____] | | |_____| Networks Co'Ltd Inc.
Net: ag934x_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
wasp reset mask:c03300
WASP ----> S27 PHY
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
s27 reg init
eth0 setup
WASP ----> S27 PHY
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
s27 reg init lan
ATHRS27: resetting done
eth1 setup
eth0, eth1
Http reset check.
Trying eth0
eth0 link down
FAIL
Trying eth1
eth1 link down
FAIL
Hit any key to stop autoboot: 0
##################################
# BHU Device bootloader menu #
##################################
[1(t)] Upgrade firmware with tftp
[2(h)] Upgrade firmware with httpd
[3(a)] Config device and server IP Address
[4(i)] Print device infomation
[5(d)] Device test
[6(l)] License manager
[0(r)] Reboot device
[ (c)] Enter to commad line
Please input cmd key:
|
|