伪连接建立不了?

migran

我用mini bt3.61 可以建立-1伪连接,但在bt3里就出错
mini bt
23:45:06  Waiting for beacon frame (BSSID: 00:21:27:80:XX:1C) on channel 6
23:45:06  Sending Authentication Request (Open System) [ACK]
23:45:06  Authentication successful
23:45:06  Sending Association Request [ACK]
23:45:06  Association successful :-)

但用bt3时
22:57:32 Sending Authentication Request (Open System)
22:57:34 Sending Authentication Request (Open System)
22:57:36 Sending Authentication Request (Open System)
22:57:38 Sending Authentication Request (Open System)
22:57:40 Sending Authentication Request (Open System)
22:57:42 Sending Authentication Request (Open System)
22:57:45 Sending Authentication Request (Open System)
22:57:47 Sending Authentication Request (Open System)
22:57:49 Sending Authentication Request (Open System)
22:57:51 Sending Authentication Request (Open System)
22:57:53 Sending Authentication Request (Open System)
22:57:55 Sending Authentication Request (Open System)
22:57:58 Sending Authentication Request (Open System)
22:58:00 Sending Authentication Request (Open System)
22:58:02 Sending Authentication Request (Open System)
22:58:04 Sending Authentication Request (Open System)
Attack was unsuccessful. Possible reasons:
* Perhaps MAC address filtering is enabled.
* Check that the BSSID (-a option) is correct.
* Try to change the number of packets (-o option).
* The driver/card doesn't support injection.
* This attack sometimes fails against some APs.
* The card is not on the same channel as the AP.
* You're too far from the AP. Get closer, or lower

migran

有没有高手指点一下

lqbi

对啊对啊，我也是跟你一样啊，建立不了，请高手指点一下。

migran

有没有高手,是信号不好的原因吗

langxtx

我的DELL 1390网卡用BT3也很难建立伪连接，但是用BT4就可以，是在同一个位置，连接同一个AP的，我感觉是BT对我的网卡支持不好，楼主的问题可能也是这样的。

migran

就是这情况呀,BT4好用吗

walter.wang

这个问题可能是BT3对你的网卡支持不好，另外无线太复杂了，环境不一样，信号传输就会影响。这样情况一般是信号不好的原因造成的。当然也是有可能是bt3就是网卡支持的问题。