中尉
- 注册时间
- 2010-9-20
- 金币
- 652 个
- 威望
- 2 个
- 荣誉
- 0 个
累计签到:7 天 连续签到:0 天 [LV.20]漫游旅程
|
发表于 2014-9-9 11:48
本帖最后由 riyueyou 于 2014-9-9 11:52 编辑
想知道这块板子上usb接口的电感是啥参数可不可以短接?wo
顺便附上ttl信息
会 折腾的自己提取固件刷相应分区试试反正也刷不死!!前提是bootloader没遭到破坏
+Ethernet eth0: MAC address 00:03:7f:ff:ff:fe
IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 14:21:45, Mar 27 2010
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: pb44
RAM: 0x80000000-0x84000000, [0x800511f0-0x80fe1000] available
FLASH: 0xbf000000 - 0xc0000000, 256 blocks of 0x00010000 bytes each.
== start led2 on
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load -d vmlinux.bin.gz
Image loaded from 0x80060000-0x80267085
config Image loaded from 0xbffe0000-0xbfff0000
RedBoot> exec -c "console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M"
Now booting linux kernel:
Base address 0x80050000 Entry 0x80245000
Cmdline : console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
Linux version 2.6.15--LSDK-7.3.0.387 (blackdragon@aqlinux) (gcc version 3.4.4) #202 Mon Apr 9 19:39:07 HKT 2012
flash_size passed from bootloader = 16
arg 1: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 512 (order: 9, 8192 bytes)
Using 340.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 62280k/65536k available (1591k kernel code, 3192k reserved, 344k data, 140k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Generic PHY: Registered new driver
AR7100 GPIOC major 0
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
Searching for RedBoot partition table in ar7100-nor0 at offset 0xff0000
7 RedBoot partitions found on MTD device ar7100-nor0
Creating 7 MTD partitions on "ar7100-nor0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00160000 : "vmlinux.bin.gz"
0x00160000-0x00f60000 : "pb44-jffs2"
0x00f60000-0x00fe0000 : "config"
0x00fe0000-0x00ff0000 : "board-config"
0x00ff0000-0x00fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x00fff000-0x01000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
Creating 1 MTD partitions on "ar7100-nor0":
0x00ff0000-0x01000000 : "fisconfig"
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
init started: BusyBox v1.4.2 (2012-04-09 19:43:45 HKT) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Mounting file systems
ln: /etc/resolv.conf: File exists
Device version is the newest.
AP
in ap83 pro_ctl_mod init
AP2400-IFM,0500G00P01
0500G0
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 512
AG7100: Max segments per packet 4
AG7100: Max tx descriptor count 400
AG7100: Max rx descriptor count 252
AG7100: fifo cfg 3 018001ff
AG7100CHH: Mac address for unit 0
AG7100CHH: ff:ff:ff:ff:ff:ff
ath_hal: 0.9.17.1 (AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2316, RF2317, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
dfs_init_radar_filters: Unknown dfs domain 0
!!!!! SC Callback Registration for wifi0
wifi0: Atheros 9160: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan: mac acl policy registered
wlan_sms4: Version 1.0.1
Copyright (c) 2001-2007 IWNCOMM Communications, Inc, All Rights Reserved
ag7100_ring_alloc Allocated 4800 at 0x83b5e000
ag7100_ring_alloc Allocated 3024 at 0x8025a000
AG7100: cfg1 0xf cfg2 0x7014
AG7100: unit 0: phy not up carrier 1
Writing 4
AG7100: unit 0 phy is up...RGMii 100Mbps full duplex
AG7100: pll reg 0x18050010: 0x1099 AG7100: cfg_1: 0x1ff0000
AG7100: cfg_2: 0x3ff
AG7100: cfg_3: 0x18001ff
AG7100: cfg_4: 0xffff
AG7100: cfg_5: 0x7ffef
AG7100: done cfg2 0x7115 ifctl 0x10000 miictrl 0x12
use serverIP
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFHWADDR: No such device
device eth0 entered promiscuous mode
default: port 1(eth0) entering learning state
default: topology change detected, propagating
default: port 1(eth0) entering forwarding state
hostapd config dir ok
killall: udhcpc: no process killed
dev.wifi0.thinap = 0
Jan 1 08:01:16 crond[1016]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:16 crond[1021]: crond 2.3.2 dillon, started, log level 8
/jffs/config.ap83: /jffs/config.ap83: 1: cannot create /proc/sys/dev/wifi0/nonoverlapping: Directory nonexistent
into alarmfunc
/jffs/config.ap83: /jffs/config.ap83: 1: /usr/sbin/hostapd: not found
SC Pushbutton Notify on wifi0::ath0
Country ie is CN
Country ie is CN
device ath0 entered promiscuous mode
default: port 2(ath0) entering learning state
============================
setantenna : wifi0 2
============================
default: topology change detected, propagating
default: port 2(ath0) entering forwarding state
Jan 1 08:01:36 crond[2821]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:36 crond[2830]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:36 crond[2839]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:36 crond[2848]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:37 crond[2866]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:37 crond[2875]: crond 2.3.2 dillon, started, log level 8
Jan 1 08:01:37 crond[2879]: crond 2.3.2 dillon, started, log level 8
此主板自带的网卡是大功率的自带功放!最高32DB
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?注册
x
|